Digital Timer Time Delay ON Relay pewaktu alat Mesin Waktu

Plastik. Product introduction: 1. Operating voltage: 6-30V. 2. Trigger Signal Source: High Level Trigger 3.0 V-24 V), signal ground and system ground are not common, which can increase anti-interference abilit. system short circuit can also connect with a ground common). 3. Output Capacity: can control no more than DC 30V5A AC or 220 V devices 5A. 4. Optocoupler Isolation: improve the anti-interference ability, after the parameter setting, it will memory forever. Warning: Relay contact is passive and electricity production, 1 channel has the control function on off. Operation mode: P1: After triggered signal, power relay on time OP, then turn off, within the OP period following operation: 1 P1.1: signal being triggered again is not effective. 2 P1.2: signal being triggered again, start time again. 3 P1.3: signal being triggered again, reset, disconnect relay, stop timing. P2: giving the trigger signal, the time after shutdown relay CL power relay OP time, then timing, turn off the rela